Everytime i turn-on my PC it will direct to BIOS setup and after exiting to BIOS my PC enjoy no display.?

Everytime i turn-on my PC it will direct to BIOS setup and after exiting to BIOS my PC enjoy no display.?

You could try three things.

1. Boot on out of danger mode

2. Load bios default (press del at boot-up)

3. Check cable and power nouns to hard drive



If adjectives these fails, your Operating system is probably corrupted (could be a virus) . If you hold XP, load the installation compact disc and choose repair XP. You may have to reactivate your software after you do this. If it still doesn't work, your complex drive is kaput and needs to be replaced.
first check bios setup properly. Then reboot the system in a minute check it.
open your computer and product sure the cable to the hard drive is plugged contained by tightly.On both the drive and mother board..good luck
Definitely something extraordinary is going on...



Did something happen to the domestic device since it last worked?



Did you move it?



You involve to check all of the devices and trademark sure they are all properly seated.



A gadget will not properly boot up if memory, CPU, Hard drive, video card, power connections were jostle - I have have problems like this but be able to resolve by making sure the parts be seated correctly.





If you are not familiar beside all of the internal parts it looks close to you need to bring familiar.



Learn around them slowly a little bit at a time. The toughest is the motherboard (mainboard also).



You might want to check out a book at the library on Hardware parts of the PC.